The Environmentally Friendly Way To Clean Aircraft Exteriors, Interiors, Food Processing Areas and Other Washable Surfaces.

- NON-HAZARDOUS
- NON-TOXIC
- NON-FLAMMABLE
- NON-CAUSTIC
- BIO-DEGRADABLE


NatureSolve-AC is not a soap, detergent or petroleum solvent.
NatureSolve-AC is an industrial strength concentrate, formulated to remove all common soils, grease, oil, dirt, wax, gum, dye, inks, carbon, smoke and exhaust stains. NatureSolve-AC cleans metal, plastic, rubber, porcelain, concrete and wood surfaces through a biodegradable proprietary formula safely, effectively and economically.

NatureSolve-AC is safe to store in a normal way and is user
friendly-no need for special clothing or protective devices.

NatureSolve-AC may be used in pressure washers, soak tanks, dip tanks, steam cleaners, ultra-sonic tanks, or applied by spray, cloth or mop.


Features/Benefits of NatureSolve-AC

Liquid Concentrate
Readily Biodegradable
pH 7-8 in concentrated form
Rinses film-free, leaves no residue
Non-streaking
Contains no Phosphates, Nitrates, Sulphates, Sulfonates, Caustics, Terpenes, Chlorinated Solvents or Petroleum by-products
Less than 50 g/l Volatile Organic Compounds (VOC’s) in dilution as tested by California South Coast Air Quality Management District
Meets new FSIS (Food Safety and Inspection Service) policy changes to 9 CFR Parts 308, 318 and 381 Subpart H

• Will not react with other chemicals to create hazardous conditions
• Will not harm fabrics
• Will enhance natural bacteria found in waste water treatment systems, sewer systems, septic tanks, grease traps, drain lines and clarifiers
• Compatible with Oil/Water separators
• May be used as a scale deposit inhibitor in heating and cooling systems

Safe, Cost Effective and User Friendly

NatureSolve-AC is pH balanced colloid, non-ionic surfactant concentrate that removes petroleum based soils, fats, oils and greases; safely, efficiently and cost effectively. NatureSolve-AC formulation allows for a substantially higher “load point” than other aqueous based cleaners. The “load point” is the amount of contaminant that can be solubilized in a mixed solution of cleaner and water. The higher “load point” allows for more effective cleaning.

NatureSolve AC - Testing Results

1. Scientific Material International Inc.
A: Passes Boeing D6-17487 revision M, Exterior and General Cleaners and Liquid Waxes, Polishes and Polishing Compounds.
B: Passes Douglas Aircraft Company Customer Service Document CSD#1, Revised August 2, 1988, Type 1: Material and Procedures for General Exterior Cleaning of Painted and Unpainted Surfaces.
C: Passes AMS 1526B, Cleaner for Aircraft Exterior Surfaces Water-Miscible, Pressure-Spraying Type.

2. South Coast Air Quality Management District
Certified as a Clean Air Solvent (Brand name Eliminator)

3. Static Acute Bioassay Procedures for Hazardous Waste Samples, November
1988, California Department of Fish and Game WPCL
Passes condition of 100% survival at 100mg/L LC-50 = 129 mg/L

Application / Dilution Ratio’s

Available in the following sizes: 1, 5, 25, 208 and 1000 litres